Light Not Working? Fix Your Broan Allure Range Hood Bulbs Now

If the lights under your Broan Allure range hood have stopped working, it can be frustrating. But with a few simple troubleshooting steps, you can get them glowing again.

We'll also provide fixes to get your Allure hood fully illuminated once more.

Using the Right Bulb Types

To avoid continual issues, it's essential to use bulb types compatible with your Broan Allure model. Consult the manual to confirm which bulbs work best.

Many Allure range hoods use halogen bulbs. But LED options are more energy-efficient. Check if LED replacements properly fit your light fixtures before installing.

Where to Buy Replacement Bulbs

You can purchase compatible Allure range hood bulbs online or from lighting and hardware stores. Broan also sells replacement bulbs directly, often with how-to guides.

When buying new bulbs, note the socket base type and dimensions to match your existing fixtures.

Step 1 - Check Bulb Seating and Fixtures

Before replacing bulbs, inspect the current ones still in place. Look for any cracks or damage. Then ensure they are properly seated in the sockets.

Next, turn off the range hood lights and allow to fully cool. Now remove bulbs and clean fixtures with a soft cloth to remove dust and grease accumulation.

Reseat bulbs properly, restore power, and test for proper lighting function.

Why Proper Seating Matters

If bulbs loosen from vibrations or heat, electrical connectivity fails. And no lighting despite intact bulbs. Periodically checking seating prevents this issue.

Step 2 - Inspect the Wiring

If adjusting bulbs and fixtures doesn't resolve lighting problems, wiring damage may be the culprit.

First, turn off power to the range hood at the circuit breaker. Then remove the light assembly from the hood.

• Loose wire nut connections
• Exposed copper from damaged wire insulation
• Burnt or cracked wiring
• Wires detached from terminals

If any wiring issues are found, you'll need to repair connections. Secure any loose wires and replace damaged cable runs as needed before the next step.

Stay Safe - Turn Off Power First

Working with electrical components while still energized is extremely dangerous. So cutting power first is crucial safety precaution.

Step 3 - Adjust Sensor Settings

Some Broan Allure models have adjustable light sensors to activate illumination. If lights aren't triggering appropriately, adjusting sensitivity may help.

First, check your user manual for customization instructions. For example, an onboard dial, switch, or potentiometer can alter sensitivity.

We suggest gradual adjustments in 10% increments to achieve desired activation responsiveness. Don't forget to test changes in real kitchen conditions. Overly high sensitivity causes false positives while too low fails to trigger lights reliably when needed.

The Benefits of Tuned Sensors

Taking time to properly adjust sensor settings prevents lighting issues. Your Allure hood only activates bright, energy-hungry bulbs when truly needed.

Step 4 - Replace Faulty Components

If you've validated bulb integrity and connections without luck, internal electrical faults likely cause persisting problems.

Check for a failing power switch, bad wiring terminals, faulty lamp sockets, or burnt out circuit board. Consult Broan support for troubleshooting tips and replacement parts specific to your Allure model.

For more complex repairs like replacing deficient solder joints or entire lamp assemblies, consider hiring an experienced electrician.

Safety First When Replacing Electrical Parts

While minor DIY repairs are fine for handy homeowners, more involved fixes require great care. Consult pros whenever you lack electrical expertise or comfort working on sensitive wiring.

Step 5 - Regular Maintenance is Key

Prevent future lighting issues and extend operational lifespan through periodic maintenance:

• Clean range hood surfaces and fixtures monthly
• Check for loose wiring connections
• Replace old halogen bulbs every 6-12 months

Keeping your Broan Allure hood in top shape ensures it lights up like new when cooking. Now let's review some common questions about maintaining these range hood light bulbs and components.

Frequently Asked Broan Lighting Questions

See below for answers to our top Allure range hood lighting FAQs:

While Broan Allure light issues can be frustrating, most causes are easily repairable. Follow our guide to methodically inspect bulbs, wires, sensors, switches, and sockets.

Catching and replacing defective parts promptly keeps your range hood fully illuminated. Ensuring effective lighting for years so you can cook safely.

And performing regular maintenance prevents problems altogether. So review our tips to keep your Broan Allure range hood lights shining brightly.